SMC_KCl_noise.cellml

Single-cell response experiment

In the Single-cell response experiment, the isolated cell model is configured and parameterised with an applied concentration clamp protocol.

You can change the parameters of stimulation in the component clamp_para. You can also bypass the parameters in the component Para and define your own parameters.

The simulation experiment can be obtained by loading the corresponding SED-ML document into OpenCOR and executing the simulation. We use the Python script simFig2 , simFig2_1, simFig2_2, simFig2_3, simFig7 , simFig7_1, simFig7_2, simFig7_3, simFig7E , simFig7E_1, simFig7E_2, simFig7E_3, and simFig3 to perform the simulation for the following figures.

The cytosolic calcium concentration of an isolated cell in presence of noise

Since we do not know the noise strength, we have tried different values to reproduce Fig 2 in the primary paper.

Figure [1] shows the cytosolic calcium concentration of an isolated cell in presence of noise with the standard deviation of 0.0015 and 0.002.

[1]
simFig2_1

Figure [2] shows the cytosolic calcium concentration of an isolated cell in presence of noise with the standard deviation of 0.0025 and 0.003.

[2]
simFig2_2

Dynamics of an isolated SMC stimulated by a receptor-ligand agonist

Figure [3] shows the simulation result of an isolated SMC stimulated by a receptor-ligand agonist (Fig 3 in the primary paper).

[3]
simFig3

The cytosolic calcium concentration of an isolated cell by KCl stimulation in presence of noise

Regarding Fig 7 in the primary paper, we do not know the value of free parameters E and JPLCagonist apart from the noise strength. We have a few attempts as shown in the following figures.

[4]
simFig7_1
[5]
simFig7_2
[6]
simFig7E_1
[7]
simFig7E_2